ActLimit

SCPI Commands :

CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:ENDC
CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:CAGGregation

class ActLimitCls[source]

ActLimit commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_caggregation() → MevLimit[source]

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:CAGGregation
value: enums.MevLimit = driver.configure.nrSubMeas.multiEval.limit.seMask.actLimit.get_caggregation()

Selects the active spectrum emission mask and OBW limit for NR SA with carrier aggregation.

return:

limit: STD: use standard limits UDEF: use user-defined limits

get_endc() → MevLimit[source]

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:ENDC
value: enums.MevLimit = driver.configure.nrSubMeas.multiEval.limit.seMask.actLimit.get_endc()

Selects the active spectrum emission mask and OBW limit for EN-DC.

return:

limit: STD: use standard limits UDEF: use user-defined limits

set_caggregation(limit: MevLimit) → None[source]

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:CAGGregation
driver.configure.nrSubMeas.multiEval.limit.seMask.actLimit.set_caggregation(limit = enums.MevLimit.STD)

Selects the active spectrum emission mask and OBW limit for NR SA with carrier aggregation.

param limit:

STD: use standard limits UDEF: use user-defined limits

set_endc(limit: MevLimit) → None[source]

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:SEMask:ACTLimit:ENDC
driver.configure.nrSubMeas.multiEval.limit.seMask.actLimit.set_endc(limit = enums.MevLimit.STD)

Selects the active spectrum emission mask and OBW limit for EN-DC.

param limit:

STD: use standard limits UDEF: use user-defined limits