Pdynamics

SCPI Commands :

CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:ENABle
CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:OFFPower

Commands in total: 5
Subgroups: 2
Direct child commands: 2

get_enable() → bool[source]

# CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:ENABle
value: bool = driver.configure.nrSubMeas.prach.limit.pdynamics.get_enable()

Enables or disables the limit check for the power dynamics measurement.

Returns:: enable: OFF | ON

get_off_power() → float[source]

# CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:OFFPower
value: float = driver.configure.nrSubMeas.prach.limit.pdynamics.get_off_power()

Defines an upper limit for the OFF power determined with the power dynamics measurement.

Returns:: off_power: Upper limit before adding the test tolerance

set_enable(enable: bool) → None[source]

# CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:ENABle
driver.configure.nrSubMeas.prach.limit.pdynamics.set_enable(enable = False)

Enables or disables the limit check for the power dynamics measurement.

Parameters:: enable – OFF | ON

set_off_power(off_power: float) → None[source]

# CONFigure:NRSub:MEASurement<Instance>:PRACh:LIMit:PDYNamics:OFFPower
driver.configure.nrSubMeas.prach.limit.pdynamics.set_off_power(off_power = 1.0)

Defines an upper limit for the OFF power determined with the power dynamics measurement.

Parameters:: off_power – Upper limit before adding the test tolerance

Cloning the Group

# Create a copy of the original group, that exists independently
pdynamics_copy = driver.configure.nrSubMeas.prach.limit.pdynamics.clone()

Subgroups