Eattenuation

SCPI Command :

CONFigure:NRSub:MEASurement<Instance>:RFSettings:EATTenuation
Commands in total: 1
Subgroups: 0
Direct child commands: 1
class EattenuationStruct[source]

Response structure. Fields:

  • 1 Rf_Input_Ext_Att: float: For input path with antenna 1

  • 2 Rf_Input_Ext_Att_2: float: For input path with antenna 2

get() → EattenuationStruct[source]
# CONFigure:NRSub:MEASurement<Instance>:RFSettings:EATTenuation
value: EattenuationStruct = driver.configure.nrSubMeas.rfSettings.eattenuation.get()

Defines an external attenuation (or gain, if the value is negative) , to be applied to the input connector. A query returns 1 or 2 values, depending on the number of antennas configured via method RsCMPX_NrFr1Meas.configure.nrSubMeas.nantenna() .

Returns:

structure: for return value, see the help for EattenuationStruct structure arguments.

set(rf_input_ext_att: float, rf_input_ext_att_2: float = None) → None[source]
# CONFigure:NRSub:MEASurement<Instance>:RFSettings:EATTenuation
driver.configure.nrSubMeas.rfSettings.eattenuation.set(rf_input_ext_att = 1.0, rf_input_ext_att_2 = 1.0)

Defines an external attenuation (or gain, if the value is negative) , to be applied to the input connector. A query returns 1 or 2 values, depending on the number of antennas configured via method RsCMPX_NrFr1Meas.configure.nrSubMeas.nantenna() .

Parameters:

  • rf_input_ext_att – For input path with antenna 1

  • rf_input_ext_att_2 – For input path with antenna 2