Average

SCPI Commands :

READ:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
FETCh:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
CALCulate:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Endc_Neg: enums.ResultStatus2: ACLR for the adjacent channel with lower frequency

  • Carrier: enums.ResultStatus2: Power in the allocated channel (aggregated BW)

  • Endc_Pos: enums.ResultStatus2: ACLR for the adjacent channel with higher frequency

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Endc_Neg: float: ACLR for the adjacent channel with lower frequency

  • Carrier: float: Power in the allocated channel (aggregated BW)

  • Endc_Pos: float: ACLR for the adjacent channel with higher frequency

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
value: CalculateStruct = driver.nrSubMeas.multiEval.aclr.endc.average.calculate()

Returns the relative ACLR values for EN-DC, as displayed in the table below the ACLR diagram. The current and average values can be retrieved. See also ‘Square Spectrum ACLR’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
value: ResultData = driver.nrSubMeas.multiEval.aclr.endc.average.fetch()

Returns the relative ACLR values for EN-DC, as displayed in the table below the ACLR diagram. The current and average values can be retrieved. See also ‘Square Spectrum ACLR’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NRSub:MEASurement<Instance>:MEValuation:ACLR:ENDC:AVERage
value: ResultData = driver.nrSubMeas.multiEval.aclr.endc.average.read()

Returns the relative ACLR values for EN-DC, as displayed in the table below the ACLR diagram. The current and average values can be retrieved. See also ‘Square Spectrum ACLR’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.