StandardDev

SCPI Commands :

READ:NRSub:MEASurement<Instance>:MEValuation[:CC<no>][:LAYer<layer>]:MODulation:SDEViation
FETCh:NRSub:MEASurement<Instance>:MEValuation[:CC<no>][:LAYer<layer>]:MODulation:SDEViation
Commands in total: 2
Subgroups: 0
Direct child commands: 2
class ResultData[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.

  • 3 Evm_Rms_Low: float: EVM RMS value, low EVM window position

  • 4 Evm_Rms_High: float: EVM RMS value, high EVM window position

  • 5 Evm_Peak_Low: float: EVM peak value, low EVM window position

  • 6 Evm_Peak_High: float: EVM peak value, high EVM window position

  • 7 Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position

  • 8 Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position

  • 9 Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position

  • 10 Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position

  • 11 Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position

  • 12 Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position

  • 13 Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position

  • 14 Ph_Error_Peak_High: float: Phase error peak value, high EVM window position

  • 15 Iq_Offset: float: I/Q origin offset

  • 16 Frequency_Error: float: Carrier frequency error

  • 17 Timing_Error: float: Time error

  • 18 Tx_Power: float: User equipment power

  • 19 Peak_Power: float: User equipment peak power

  • 20 Psd: float: No parameter help available

  • 21 Evm_Dmrs_Low: float: EVM DMRS value, low EVM window position

  • 22 Evm_Dmrs_High: float: EVM DMRS value, high EVM window position

  • 23 Mag_Err_Dmrs_Low: float: Magnitude error DMRS value, low EVM window position

  • 24 Mag_Err_Dmrs_High: float: Magnitude error DMRS value, high EVM window position

  • 25 Ph_Error_Dmrs_Low: float: Phase error DMRS value, low EVM window position

  • 26 Ph_Error_Dmrs_High: float: Phase error DMRS value, high EVM window position

  • 27 Freq_Error_Ppm: float: Carrier frequency error in ppm

  • 28 Sample_Clock_Err: float: No parameter help available

  • 29 Antenna_1_Power: float: No parameter help available

  • 30 Antenna_2_Power: float: No parameter help available

  • 31 Carrier_Power: float: Carrier power

fetch(carrierComponent=CarrierComponent.Default, layer=Layer.Default) → ResultData[source]
# FETCh:NRSub:MEASurement<Instance>:MEValuation[:CC<no>][:LAYer<layer>]:MODulation:SDEViation
value: ResultData = driver.nrSubMeas.multiEval.cc.layer.modulation.standardDev.fetch(carrierComponent = repcap.CarrierComponent.Default, layer = repcap.Layer.Default)

Return the current, average and standard deviation single-value results for carrier <no>, layer/antenna <l>. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

Parameters:

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • layer – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Layer’)

Returns:

structure: for return value, see the help for ResultData structure arguments.

read(carrierComponent=CarrierComponent.Default, layer=Layer.Default) → ResultData[source]
# READ:NRSub:MEASurement<Instance>:MEValuation[:CC<no>][:LAYer<layer>]:MODulation:SDEViation
value: ResultData = driver.nrSubMeas.multiEval.cc.layer.modulation.standardDev.read(carrierComponent = repcap.CarrierComponent.Default, layer = repcap.Layer.Default)

Return the current, average and standard deviation single-value results for carrier <no>, layer/antenna <l>. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

Parameters:

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • layer – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Layer’)

Returns:

structure: for return value, see the help for ResultData structure arguments.