Average

SCPI Commands :

FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:ACLR:ENDC:AVERage
CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:ACLR:ENDC:AVERage
Commands in total: 2
Subgroups: 0
Direct child commands: 2
class CalculateStruct[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Seg_Reliability: int: Reliability indicator for the segment

  • 3 Statist_Expired: int: Reached statistical length in slots

  • 4 Out_Of_Tolerance: int: Percentage of measured subframes with failed limit check

  • 5 Nr_Neg: enums.ResultStatus2: ACLR for the adjacent channel with lower frequency

  • 6 Carrier: enums.ResultStatus2: Power in the allocated channel (aggregated BW)

  • 7 Nr_Pos: enums.ResultStatus2: ACLR for the adjacent channel with higher frequency

class FetchStruct[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Seg_Reliability: int: Reliability indicator for the segment

  • 3 Statist_Expired: int: Reached statistical length in slots

  • 4 Out_Of_Tolerance: int: Percentage of measured subframes with failed limit check

  • 5 Nr_Neg: float: ACLR for the adjacent channel with lower frequency

  • 6 Carrier: float: Power in the allocated channel (aggregated BW)

  • 7 Nr_Pos: float: ACLR for the adjacent channel with higher frequency

calculate(sEGMent=SEGMent.Default) → CalculateStruct[source]
# CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:ACLR:ENDC:AVERage
value: CalculateStruct = driver.nrSubMeas.multiEval.listPy.segment.aclr.endc.average.calculate(sEGMent = repcap.SEGMent.Default)

Returns ACLR single value results for EN-DC mode, list mode segment <no>. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

Parameters:

sEGMent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

Returns:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(sEGMent=SEGMent.Default) → FetchStruct[source]
# FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:ACLR:ENDC:AVERage
value: FetchStruct = driver.nrSubMeas.multiEval.listPy.segment.aclr.endc.average.fetch(sEGMent = repcap.SEGMent.Default)

Returns ACLR single value results for EN-DC mode, list mode segment <no>. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

Parameters:

sEGMent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

Returns:

structure: for return value, see the help for FetchStruct structure arguments.