Average
SCPI Commands :
FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr6g>:SEMask:AVERage
CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr6g>:SEMask:AVERage
- class AverageCls[source]
Average commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Seg_Reliability: int: Reliability indicator for the segment
Statist_Expired: int: Reached statistical length in slots
Out_Of_Tolerance: int: Percentage of measured subframes with failed limit check
Obw: float or bool: Occupied bandwidth
Tx_Power: float or bool: Total TX power in the slot
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Seg_Reliability: int: Reliability indicator for the segment
Statist_Expired: int: Reached statistical length in slots
Out_Of_Tolerance: int: Percentage of measured subframes with failed limit check
Obw: float: Occupied bandwidth
Tx_Power: float: Total TX power in the slot
- calculate(sEGMent=SEGMent.Default) CalculateStruct [source]
# SCPI: CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr6g>:SEMask:AVERage value: CalculateStruct = driver.nrSubMeas.multiEval.listPy.segment.seMask.average.calculate(sEGMent = repcap.SEGMent.Default)
Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.
- param sEGMent:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch(sEGMent=SEGMent.Default) FetchStruct [source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr6g>:SEMask:AVERage value: FetchStruct = driver.nrSubMeas.multiEval.listPy.segment.seMask.average.fetch(sEGMent = repcap.SEGMent.Default)
Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.
- param sEGMent:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return:
structure: for return value, see the help for FetchStruct structure arguments.