StandardDev

SCPI Commands :

READ:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
FETCh:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
CALCulate:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
class StandardDevCls[source]

StandardDev commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: No parameter help available

  • Out_Of_Tolerance: int: No parameter help available

  • Off_Power_Before: float or bool: No parameter help available

  • On_Power_Rms: float or bool: No parameter help available

  • On_Power_Peak: float or bool: No parameter help available

  • Off_Power_After: float or bool: No parameter help available

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.

  • Off_Power_Before: float: OFF power mean value for the time period before SRS transmission.

  • On_Power_Rms: float: ON power mean value over the SRS transmission.

  • On_Power_Peak: float: ON power peak value for the SRS transmission

  • Off_Power_After: float: OFF power mean value for slot after SRS transmission.

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
value: CalculateStruct = driver.nrSubMeas.srs.pdynamics.standardDev.calculate()

No command help available

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
value: ResultData = driver.nrSubMeas.srs.pdynamics.standardDev.fetch()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NRSub:MEASurement<Instance>:SRS:PDYNamics:SDEViation
value: ResultData = driver.nrSubMeas.srs.pdynamics.standardDev.read()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.