Minimum

SCPI Commands :

READ:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
FETCh:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
CALCulate:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
class MinimumCls[source]

Minimum commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.

  • Off_Power_Before: float or bool: OFF power before the preamble, without transient period

  • On_Power_Rms: float or bool: ON power mean value over the preamble.

  • On_Power_Peak: float or bool: ON power peak value within the preamble

  • Off_Power_After: float or bool: OFF power after the preamble, without transient period

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.

  • Off_Power_Before: float: OFF power before the preamble, without transient period

  • On_Power_Rms: float: ON power mean value over the preamble.

  • On_Power_Peak: float: ON power peak value within the preamble

  • Off_Power_After: float: OFF power after the preamble, without transient period

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
value: CalculateStruct = driver.nrSubMeas.prach.pdynamics.minimum.calculate()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
value: ResultData = driver.nrSubMeas.prach.pdynamics.minimum.fetch()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NRSub:MEASurement<Instance>:PRACh:PDYNamics:MINimum
value: ResultData = driver.nrSubMeas.prach.pdynamics.minimum.read()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.