StandardDev
SCPI Commands :
READ:NRSub:MEASurement<Instance>:PRACh:PDYNamics:SDEViation
FETCh:NRSub:MEASurement<Instance>:PRACh:PDYNamics:SDEViation
- class StandardDevCls[source]
StandardDev commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- class ResultData[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.
Off_Power_Before: float: OFF power before the preamble, without transient period
On_Power_Rms: float: ON power mean value over the preamble.
On_Power_Peak: float: ON power peak value within the preamble
Off_Power_After: float: OFF power after the preamble, without transient period
- fetch() ResultData [source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:PRACh:PDYNamics:SDEViation value: ResultData = driver.nrSubMeas.prach.pdynamics.standardDev.fetch()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:NRSub:MEASurement<Instance>:PRACh:PDYNamics:SDEViation value: ResultData = driver.nrSubMeas.prach.pdynamics.standardDev.read()
Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.